Baseus is a consumer electronics brand that integrates R & D, design, production, and sales of Shenzhen Boshi Technology Co., Ltd.. It was established in 2011. After ten years of development, Pedi has achieved pride in the 3C charging accessories industry. Human results have launched a number of online celebrity explosive charging accessories, becoming the first choice of charging equipment brands for many consumers.
Baseus is one of the earliest domestic brands involving nitride chargers in China. In August 2019, Bisi released the world’s first 2C1A nitride charger, 65W power with a 2C1A interface configuration of Wannin oil. Frequent efficient advantages condensed into strip -shaped appearance, leading the development of 65W multi -nitrogen nitride 镓 fast charging industry.
In February 2020, Bisi launched the world’s first 120W nitrogen nitrogen+SIC charger (GAN+SIC) charger, and obtained the first domestic 120W nitrogen -nitride CCC CCC certificate, which caused a sensation. In March 2021, Bei Si took the Qualcomm QC5 and launched the world’s first QC5 nitrogen -nitrogen charger. The 100W output power is compatible with the USB PD fast charging standard. It can run the upper limit of the PD. It is the best partner of the notebook.
It can be seen that Bei Si has achieved a number of proud results on high -power charging accessories. The following charging head network will take stock of 100W ultra -large power charging accessories. The product covers three major categories: charger, data cable, and vehicle charger. Which powerful products.
Sisi 100W QC5 Nitrogen Moisturizing Electric Charger
The Sisi QC5 nitrogen nitrogen charger is designed with the ID of the Sisi Fast Charging Family. It is treated with matte white surface. The front edges are excessive. Classic ID design of the family. The side of the Sisi QC5 nitrogen nitrogen charger is printed on the side of 100W. The special font is designed in the Bisi family ID, which uses foldable inserted to facilitate the use of users.
The output interface is placed on the lower side, which is configured for a single USB-C output port. The orange USB-C tongue is very eye-catching. The “Qualcomm Quick Charge 5” logo is printed under the interface, indicating that the charger passed the Qualcomm Qualcomm Quick Charge. 5 (QC5) certification.
Product Name: GAN2 Nitrogen Moisturizing an Fast Charger
Enter: 100-240V ~, 50/60Hz, 2.5A
Output: 5V/12V3A, 9V/15V/20V5A
Shenzhen Shishang Chuangzhan Technology Co., Ltd.
The product has obtained 3C certification.
The internal QC5 nitrogen nitrogen charger is made of high -frequency and efficient nitrogen -nitrogen power device. Compared with the traditional charger volume, the three seasons are significantly reduced. The official labeling dimensions are 67mm x 30mm x 55mm. , The power density reaches 0.9W/CM³, the weight is only 178G, which is smaller than the Apple 96W charger and the lighter weight.
Using Power-Z KT002 USB testers Read the PDO PICC PDO PICC, which is compatible with USB PD fast charging standards. The PD version is 3.0, with 5V3A / 9V3A / 15V3A / 20V5A. PDO voltage, also includes a set of PPS voltage sets of 3.3-20V5A.
In addition to the QC5 fast charge protocol, the Sisi QC5 nitrogen nitrogen charger also has common fast charging protocols such as Apple2.4A, Samsung2a, QC3.0, QC2.0, QC4+. It is also well compatible with fast charging standards such as QC3.0, QC2.
Sisi 100W 2A2C nitride 镓 镓 charger
Better 100W 2C2A Charger specializes in multi -device users. There are two colors of black and white in appearance. The shell material is PC. Gan nitride technology.
Thanks to the blessing of nitride technology, Phase Gan2 Pro Nitride Nitrogen Moisturizer also controls the three -dimensional size at 85.2mm x54.8mm x30.5mm while supporting the 100W output power, and the power density reaches 0.7W/ CM, the volume is close to the Apple 61W charger, but whether in terms of power or interface, the 100W 2C2A charger is more advantageous.
The Sisi GAN2 PRO Nitrogen Moisturizing Fast Charger is equipped with a total of 4 fast charging output interfaces in 2C2A. In terms of performance, USB-C supports a variety of fast charge protocols such as PD, PPS and QC4+. USB-A supports Apple2.4A, QC , AFC, FCP, SCP, PE and other fast charge protocols. MB-C supports 100W output power no matter which interface is used alone. USB-A supports 60W output power when used alone.
The four output ports are the gospel of multi -device users. Through the power distribution strategy, the intelligent adjustment is intelligently adjusted to 100W, 65W+30W, 60W+20W+18W, 65W+20W+5V3A and other different output configurations according to the output situation. Essence
Sisi 120W 2C1A nitride 镓 charger
The Sisi 120W 2C1A nitride charger is the world’s first 120W nitride (GAN)+silicon carbide (SIC) charger. As soon as the news comes out, the industry has attracted great attention from the industry. The shape uses a flat slender ID style, full protocol, 5A PPS, and total output power up to 120W, which also makes it the performance king of the nitrogen -selling charger.
The macro camera shoots interface details. Each interface is marked with the corresponding name in the silk seal. Among the four metal shots of the orange USB-A port, the left and right sides are the shymarks responsible for power transmission. You can see the broader processing of the bullets on both sides of the large current USB-A mother seat, which can reduce the contact resistance and ensure long-term support for large-time support. Use current fast charging (such as low -voltage direct charge SCP).
The Sisi 120W nitride 镓 0 charger can’t intuitively perceive how big the size is. Xiaobian takes out the Apple 96W single -port charger to compare it together. Apple 96W charger sends 80.0 x 80.0 x 28.6mm, power density: 0.52W/CM³. Better 120W charger 94.47 x 29.92 x 55.47mm, power density: 0.76W / CM³, 14%smaller than Apple 96W. It is also close to Apple 96W.
Two USB-C interface supports power blind insertion function. Use Power-Z KT001 to read the charger USB-C1 PDO packet. The USB-C has a complete PDO voltage. 15V3A / 20V5A, and also includes a set of PPS voltage: 3.3-21V5A. In addition, it also supports common fast charging protocols such as Apple2.4A, QC2.0, QC3.0, AFC, FCP, SCP.
As a multi -port high -power output charger, when the multi -port is output, the three -port of the 120W nitrogen nitrogen charger is independent and supports the adjustment of dynamic power strategies. It can be different from 60W + 60W, 60W + 30W + 30W, 87W + 30W and so on. Adaptive switching between strategies can even be 60W + 60W fast charging for two laptops at the same time to meet different equipment and different equipment.
Sisi 100W PD to DC One Drag Two Data cable
The USB-C interface has data and power transmission functions. It has been widely used in mainstream notebooks. On the other hand, there are still many inspection of notebooks with old-style round-hole square mouths. Big black brick power adapter, bloated and cumbersome. In order to solve this problem, Si Si launched a one -dragging PD To DC rotor, built -in 20V deception, so that the old notebook can also enjoy the convenience of general PD fast charging.
In addition to the actual use of actual use value, a cable is also an important bonus item. PD to DC one drag and two rotation wiring uses champagne gold -colored zinc alloy to make heads. The source of the mesh is extended to provide the lifting of the bending folding extension.
In order to have a universal and DC output function, one end of the cable adopts a split terminal design, one end is a common USB-C interface, and the other end is the USB-C take a round mouth DC output port. Let the PD charger output the 20V voltage of the required notebook, and use it to plug it.
The old DC power adapter is large and heavy, and it cannot be commonly used with other digital products. It is more chicken -ribs. The PD To DC one -darling two -rotor wiring uses a universal USB PD fast charging standard. You can share a PD charger with digital products such as mobile phones and tablets. You only need to bring a cable to take care of your notebook and digital products to go out. Charging demand, greatly reduced the weight of luggage items.
In actual use, the data cable USB-C is inserted into the PD charger. After the output end the DC terminal head hood on the USB-C, the internal deception chip will automatically get 20V voltage output to the PD charger, insert into the notebook and the original charger There is no difference in use, the maximum charging power is as high as 100W.
In addition to charging the old laptop, the PD To DC one-duction and two rotation wiring of the DC output terminal is a USB-C to USB-C data cable. It also supports USB2.0 data transmission standards, providing up to 480Mbps data transmission rate.
Sisi 100W two -drag three PD fast charging cables
According to work needs, many users will bring multiple mobile phones, even laptops, and tablet buckets to carry them with them. The data cables of various interfaces are not universal, and only all specifications can be brought to the need. There are also one -point three -wire sales in the market, but the quality is inferior and can only output 5V, which is the same as the ribs of the ribs. In order to solve this problem, Si Si launched a high -quality and full -fitting flash series two -dragging three fast charge data cables. While eating all interfaces, you can also allow the device to enjoy the fast charging experience of up to 100W.
At first glance, the two -dragging and three fast charge data cables of the Better Flash Series are cleared up with the inferior products on the market. The aluminum alloy wrapped in the end of the end is very delicate. The input and output are the core function module of the wire. The built -in intelligent fast charge chip controls the power distribution strategy of the output line. The outer skin uses high -resistant nylon woven to strengthen the service life.
There are the following types of fast charge interfaces on the market. The USB-A port for Huawei low-voltage fast charging, USB-C port for PD fast charging, L port for Apple devices, MicroUSB port for old-style devices Essence The Sisi Flash Series Erdao Three Fast Charging data cable contains all the above-mentioned connecting skills. The input end supports USB-A / USB-C. The three output cables are USB-C interfaces, Apple interfaces, and MicroUSB interfaces. Eating all the equipment to make you have no worries.
As the core technology of the multi -function fast charging line, the built -in power distribution chip in the middle of the cable, the fast charge function module also has a LED indicator. The indicator light is bright and blue, and when it is in a fast charge state, it is bright and orange, allowing users to understand the fast charging situation at any time.
The three output line terminal heads use the overall injection molding process, and then the aluminum alloy fastening is set, and the power supports supported by each wire. The USB-C terminal has a maximum 100W power transmission performance. The Apple terminal head supports up to 20W PD fast charging, and the Microsb connector supports up to 18W QC fast charging.
The cable has a built-in 5A E-Marker chip, and the USB-C To USB-C mode supports up to 20V5A, which is 100W high-power output, which can provide full-speed charging support for laptops such as MacBook Pro16.
In addition to supporting different interface devices, the two -dragging three fast charge data cables can also expand the charger single -port output into one pair of three devices. At the same time, it is not necessary to charge for three different interface devices.
Sisi 100W Xiaobai fast charge data cable
High -power charger is welcomed by more and more users, but even if the charger supports high power, the matching wires also need to support high power to get full blood output. Best launched the 100W small white fast charging data cable, supporting 5A large -current transmission, and the maximum charging power can reach 20V5A 100W.
The color of the terminal head is white, with a baseus logo on the two terminal heads. This small white series fast charging data cable uses Taiwan’s E-Marker chip inside. The chip TID number is 1000196. Moreover, the Type-C terminal is certified by the USB association. The certified TID number is 5210000650, which has a more reliable and stable experience experience. Essence
There is also a special design of grooves at the connection between the terminal head and the tail of the mesh, which is convenient for users to insert the data cable into the interface of the charging head. The small humble design can facilitate the use of users. In addition to the design, there is a 100W parameter logo at the connection of the mesh. This data cable supports 100W high -power charging.
Use a macro lens to look at the internal design of the USB-C joint. There are 12 PIN feet on the left and right sides of the 12 PIN feet, which is designed for full PIN. The length of the wire to the end is 161cm. This length is completely sufficient in daily use, and it will not be used because the wire is too short.
Xiaobian uses the POWER-Z test table to read the E-Marker information inside the wire. From the display of the test table, we can see that this small white series fast charge data cable supports 20V 5A 100W high-power charging. The data standard is USB 2.0.
Sisi 100W shadow on the same screen on the same axis
The type of coaxial joints of Bisi shadows is USB-C to USB-C. One of them uses a 90-degree elbow design, which is convenient for users to charge the hand charging while charging. The cables are more appropriate. The terminal head uses zinc alloy to make the terminal head, which is wear -resistant and antioxidant.
Beshay shadow-shadow coales have a built-in E-Marker chip, supporting 5A large-current transmission, maximum charging power of 20V5A 100W, which meets the power transmission requirements for notebooks, mobile phones, and tablets.
The interior is made of coaxial core, which enhances the stability of the wire data transmission. The maximum transmission rate is 10Gbps. When connecting the external hard disk, you can enjoy the transmission speed of 1 second and 1G, and support the 4K@60Hz high -definition screen operation.
Sisi 100W magnetic line
Many years ago, Apple MacBook was equipped with a magnetic suction capacity, which has the benefits of automatic adsorption and charging, kicking automatically to avoid notebook drops, but the interface is specially designed, and other devices cannot be used. Recently, Better launched a new generation of magnetic data cables. It uses universal USB-C physical interfaces. The mainstream digital devices can be used and supports maximum 100W power transmission capabilities. The notebook can also enjoy the full speed of 100W magnetic suction happy fun.
One end of the 100W magnetic line is designed with a separate magnetic suction head, and the outside of the metal contact is the magnetic component. With the magnetic terminal of the other end, it connects data transmission and power transmission through powerful magnetic links. There is a blue lightning working indicator on the data cable, which is long and bright, which can avoid the embarrassment of forgetting to turn on the power supply and not charging.
Data cable has built-in E-Marker smart control chip, supports 5A current transmission, and has a maximum charging power of 20V5A 100W. Support USB2.0 data transmission standards, the maximum transmission rate is 480Mbps, which can also be used as a data cable in addition to charging.
The terminal adopts the overall injection molding and extended mesh process, which can protect the line body from being damaged by bending, and through the tightly weaving production of the tall nylon, so that the data cable has a wearing resistance and pulling. Essence
Sisi 100W exclusive car charging
The full name of the 100W exclusive car charging is “Pesxi 100W Zun Diren PPS dual-road fast charging charger”, the model “CCZX-100C”, is a all-around car charger developed for high-end users. The streamlined body is made of a dark gray lighting process, and the gold -plated shelter contacts create a special high -level texture.
The 100W exclusive car charging uses the 1A1C dual interface configuration of Wanjin Oil. The USB-C supports 5V3A / 9V3A / 12V3A / 15V3A / 20V5A Five Five PDO voltage output, with a maximum output of 100W. USB-A supports 5V4.5A / 4.5V5A / 5V3A / 9V3A / 12V2.5A / 20V1.5A six-gear output, supports PD3.0, PPS, QC3.0, SCP, FCP, AFC and other fast charging protocols.
In addition to the powerful performance of the 100W exclusivity, a multi-functional number display screen is also integrated in the middle of the output panel. C output power, USB-A output voltage, USB-A output power. Let users master the charging of each interface device in real time, and quickly determine whether it is in a fast charging, power size and other states.
In addition, based on the input voltage display function of the charger, in the standby state of not starting the car, you can understand the voltage of the car battery to judge the life of the battery. The car is running under the 12V voltage system. When the battery voltage is not started, the battery voltage should be between 11.6V-12.8V. If the battery is below 11V, the battery is in a loss state, indicating that the life span is about to end. Users need to replace the battery to avoid the anchor halfway.
Sisi 120W expansion port charging
Better 120W expansion port vehicle carrier charger uses a three -stage design. The gray gray and calm black are settled, which is well integrated into the interior atmosphere of the car. The main structure material is aluminum alloy, the left side is the extension of the cigarette lighter, the middle is DC fast charge output module, and the right side is the power supply insertion. Compared with the traditional car charger, an additional cigarette lighter interface is provided. Digital products and vehicle electrical appliances do not need to compete with the car charger to compete with the cigarette lighter interface. Everyone can use it together.
There are two models for Bo Sisi 120W expansion portal charger. The difference between the two models is that the output interface is different, and the 1A1C interface and 2A interface are equipped. 1A1C interface model USB-A supports 5V3A / 9V2A / 10V2A / 12V2.5A four fixed voltage outputs, USB-C supports 5V3A / 9V2A / 12V2.5A output, and the maximum output power is 30w+30W. The 2A interface models both USB-A support the four fixed voltage output of 5V3A / 9V2A / 10V2A / 12V2.5A, and the maximum output power is 30W+30W.
After the traditional car charger is inserted into the car cigarette lighter interface, other vehicle electrical appliances that want to use cigarette lighters cannot be used. It is more troublesome to insert a car charging. The top 120W expansion portion carrier charger comes with a cigarette lighter extension port and a silicone dust cover cover, which can provide a maximum 60W output power. Using the car charging can also be inserted into other vehicle electrical appliances without choice questions.
Based on the rapid charging standards of USB PD, the 120W expansion portal charger supports PD3.0, PPS, QC4+, QC3.0, SCP and other fast charging protocols. It is suitable for the use of mainstream digital products such as Huawei, Xiaomi, Samsung, and Apple.
Charging head network summary
The above is the introduction of the ten -thinking 100W fast charging accessories compiled by the charging head network. The product covers the chargers, data cables, and vehicle chargers, covering various occasions used by users. The 100W ultra -high power has reached the ceiling of the rapid charging standard of the USB PD, which can be used by mobile phones, tablets, and notebooks, and multiple equipment users can also meet the needs. In addition, Bisi joined various characteristic functional design, nitrogen -nitride charger high -power miniaturization, data cable’s multi -fitting, multifunctionalization of car charging, etc., is also an experience of Bomi R & D strength.