The Wireless Network of Lanzhou University of Science and Technology will achieve full coverage of the two campuses (guidelines for internal operation)

Lanzhou University of Science and Technology WiFi will be fully covered

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

You can be in the dormitory and classroom of the two campuses

You can also be in Ginkgo Forest and Yihai

Enjoy unlimited network

And the network speed will increase significantly

Is there a little excitement?

Announce

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Notice of school wireless network coverage project implementation

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Teachers and students of the whole school:

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

After the preparation of the preliminary tension, all wireless network coverage projects involve the area including public districts, teaching areas, dormitory areas, and family areas. All core and wireless network equipment are installed. The test has been completed, and currently has all new and old network cutting conditions. According to the order of school headquarters, office district, teaching area, family district, Western campus student district, office district, teaching area, family district , After the switch is completed, the core of the campus network network

40Gbps

Interconnection, gathering

Maberon

Shanghai Union, effectively improve the user experience. Network switching time is

From May 23 to June 20, 2018

According to the progress of the project, there is a possibility of advance or delay, and the specific building network cutting time will be notified separately.

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

After the completion of this network cutting, the entire school office area, teaching area, student dormitory area and outdoor area wireless network are fully covered. Some wireless network coverage of the family areas, the original certification login method of the office area and the teaching area remains unchanged, access to access The campus network must be certified, and the certification method of the family district and the student dormitory area adopts PPPOE certification.

See the on -campus network explanation document for the specific usage method.

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

The network switching process has a long time and a wide range of surfaces. The network interruption is temporarily interrupted during the network switching process. Please forgive me.

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Network and Information Center

May 22, 2018

The following content consists of three parts

1. Instructions for the use of campus network user self -service system

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Second, the instructions for the use of campus network

3. Campus network common problem handling method

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

1. Login

2. Modify the password

3. Password protection

4. Query the use of traffic

5. Query of the payment of the fee

6. Consumption protection

7. Account Passing/Reunion

Input in the browser:

http://jifei.lut.edu.cn

(1) Use the Internet account and password login to log in to the self -service service system for logging in to the campus network

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

(3) Modify and submit the password

(5) Enter the password in turn, select three questions and fill in the answer. In the future, if the password is accidentally forgotten, you can find the password through the questions and answers you set.

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

(7) Select the time period to query, you can see the detailed Internet records during this period

(9) Select the time period you want to query, you can see the detailed bill of paying the network fee within this time period

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

(11) After entering the “Consumption Protection” module, enter the upper limit of your online cost of the month (Note: This is to protect the part beyond the traffic, and the monthly user does not need to perform this operation)

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

(13) After entering the “Account Passing/Account Repent” module, perform the corresponding operation

1. Family area and dormitory area network access instructions

Second, office network and wireless network access description

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

important hint:

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

1. When the dormitory network port is not enough, you can use a septor (also known as switch) and routers for end -port expansion.

2. When using a router to make a septor, the DHCP function of the router needs to be turned off.

Login description:

1. Plug in the network cable, and the browser will automatically jump to the client to download the page, as shown below

2. Download and install the client

The client will automatically create shortcuts on the desktop, the icon is as follows

3. Enter the campus network account number and password. Click on the login. After the login is successful, click the green to cancel the humanoid icon. You can cancel the campus network and return to the client login page.

Click on the “Campus Network Self -Service System” on the login page and login success page to open the login page of the self -service system.

Login method:

1. Cable office network, please insert the network first, and the wireless network, please connect the Lut’s wireless network first

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

2. Click on any website or enter http://1.2.3.4 to jump to the certification system login page

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

3. Use the campus network account and password to log in successfully

instructions:

1. The upgraded campus network supports the automatic offline function without traffic. Generally, there is no need to deliberately do the cancellation operation

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

2. The upgraded authentication system can pop up a matching certification system page according to the user terminal resolution

Qualification system page display

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

PC login certification page

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

PC login success page

The left side of the figure below is a mobile login certification page, and the right side of the figure below is the successful page of the mobile phone login

Problem navigation:

Question 1: How does home router connect correctly?

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Question 2: How to log in to the router management interface?

Question 3: How to set the routing to dial for the PPPOE?

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Question 4: How does the router restore the factory settings?

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Question 5: How to set the router wireless router wireless wifi name and password?

Question 6: How to transform the router with switches?

Question 7: How to set your PC terminal to automatically obtain IP address?

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Question 8: How to view the IP address and MAC address of the computer PC terminal?

Question 9: Is the computer PC terminal network connection?

Answer: Please connect the network cable as shown in the figure below. The user’s main network cable is inserted into the blue WAN port. Other network cables are inserted into the yellow LAN port. The black button on the right side is to restore the factory button.

Answer: After connecting to the network cable, there is an IP address and user name password on the bottom of the router. Enter http://192.168.1.1 or httplogin.cn in the computer’s browser Different), refer to the instructions at the bottom of the router. The username and password generally default is Admin. After the first landing of the router, new passwords need to be set.

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

First log in to the router, select the network parameter, click the WAN port to set the menu, select the PPPOE method in the WLAN interface type drop -down menu, the specific setting is as shown in the figure below:

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Campus network account user name and password, click the saving button as shown in the figure below

Answer: Long press the black button on the right side of the router. After the router status light is completely off, the router will restore the factory settings after flashing again.

Question 5: How to set the name and password of the router wireless Wi-Fi?

Answer: The router itself integrates the function of a switch, which can use the router as a switch. First of all, you need to close the DHCP function of the router. The WAN port on the router does not connect any device. The main network line of the dormitory is connected to the LAN port of the router. The computer is also connected to the LAN port. The router can be used as a switch.

Answer: In the control panel of the computer, turn on the network and share center, find the local connection right -click to select the property button, and select the IP address to automatically obtain the IP address.

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Answer: Step 1: shortcut key “Window”+”R” or click “Start”-> “Run” to open the run interface; step 2: Enter CMD, click OK; Step 3: Enter ipconfig /all;

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

Answer: If the PC terminal network connection is displayed, the red fork is displayed: generally the physical line is not connected, please check whether the network cable connection line is correct, the interface is tight, and whether the router is powered up, as shown in the figure below

Recommended in the future

1. Instructions for the use of campus network user self -service system

Second, the instructions for the use of campus network

3. Campus network common problem handling method

3. Campus network common problem handling method

兰州理工大学无线网将实现两校区全覆盖(内附操作指南)

1. Family area and dormitory area network access instructions

Second, office network and wireless network access description

Question 1: How does home router connect correctly?

Question 2: How to log in to the router management interface?

Question 3: How to set the routing to dial for the PPPOE?

Question 4: How does the router restore the factory settings?

Question 6: How to transform the router with switches?

Question 7: How to set your PC terminal to automatically obtain IP address?

Question 8: How to view the IP address and MAC address of the computer PC terminal?

Question 9: Is the computer PC terminal network connection?

Author: ArticleManager