3 minutes to figure out: Why did the wall tiles fall off? Is the tile and tile method right?

The “glaze” of the glazed tile, if we observe from the naked eye, is a colorless or colorful glass made of the tile surface.Glaze is used to use mineral raw materials, such as long stone, quartz, talc, kaolin, etc. and corresponding raw materials. After being grinded according to a certain proportion, it is finally applied to the surface of the tile embryo.It has become our common glazed tiles.

Glaze tiles are a kind of tiles on the surface glazed.It is a kind of tiles that are glazed on the surface and then fired at high temperature and high pressure. This glazed decoration consists of two parts of the earth embryo and the surface.According to the main body of glazing, we can be divided into two types: pottery and porcelain soil.If the glazed tiles fired by pottery, the back of its back should be brick red; if it is a glaze tile burned from porcelain soil, its back should be gray -white.Because the surface of the glazed tile is the glazed layer, its patterns and patterns are relatively rich; but because the surface is a layer of glaze, its abrasion resistance is not very good.

Hello everyone, I am a homemath that focuses on home and decoration knowledge. Here, I will share some of the knowledge I know with as much as possible. I hope everyone can support it!

Now the decoration of the home will choose to put some tiles, which leads to the high use rate of tiles. However, many friends are not very clear about the choice of tiles. Just like a very common approach to appear now, that is, the floor tiles are on the wall. However, this method will cause many problems in the later tiles. So the home miscellaneous altar wants to talk about some knowledge of wall tiles through this article.

What is the wall tile?

The tiles on the wall include the tiles of the outer wall and the tiles of the interior wall. Here I mainly tell you about the tiles of the interior wall.

The interior wall tiles used in our house were basically selected. In the traditional sense, the interior wall tiles basically refer to glazed tiles.

The so -called glazed tile refers to a layer of glazed surface on the surface of this tile, and then made by processing.

The color of this tile is very rich, and it is very conducive to future cleaning and maintenance, so the walls of the kitchen and bathroom are basically this glazed tiles used in the past.


The glazed tiles mainly include two categories: the first category is the inner wall tiles of the glaze, and the second category is color glazed ceramic wall tiles.

What is the glaze of glazed tiles?

There are many types of glaze.

If the embryo used in the glaze is divided, we can divide the glaze into porcelain glaze, ceramic glaze, and porridge glaze; if it is divided according to the firing temperature, it can be divided into high temperature glaze and low temperature glaze. Similarly, if it is divided according to the surface completion, it can be divided into transparent glaze, color glaze, light glaze, crystalline glaze, opening glaze, and so on.

The utilization rate of glazes in my country is very high, and glazes have been used since ancient times, and they are particularly used. For example, some of the most common glazes of our glaze, it is estimated that everyone will hear it,

There are Tang Sancai, upper glazed color, underglaze color, glaze red, bucket color opening, blue and white, glaze color, and so on.

What is the glazed tile?

The most commonly appeared part of the glazed tiles is the wall of our kitchen and bathroom in our family.

This is also determined by the characteristics of the glazed brick itself.

What are the advantages of glazed tiles?

The first advantage is that its color pattern is very rich.


Glaze tiles can be said to be able to make a variety of patterns and patterns, which are indispensable for some other tiles.

The second advantage is that the surface strength of the glaze tile is very high.

Because the surface is glazed, it can be anti -seepage, which means that its surface can be kept as clean as the surface in any environment.

The third advantage is cold resistance and heat resistance.


This aspect mainly refers to the surface of the glazed brick. If the sudden cold or sudden heat, the severe temperature changes will not have a characteristic of cracks.

The fourth advantage is that the water absorption rate of glazed tiles is relatively high.

It means that some pore rates on the back of the glazed tiles are relatively large, so that the glazed tiles can be combined with the grassroots materials when pasted on the wall. In other words, it will be firmly affixed to the wall and it will be firm. It is not easy to have empty drums and falling off. In fact, this is also the main feature of the tiles.

What are the disadvantages of glazed tiles?

The first disadvantage is that the abrasion resistance is poor.

Because it is treated with two layers, that is, this glazed tile is composed of two parts. Its surface is only a layer of glaze, so it may be grinded after a long time. This is one reason why glazed tiles are not suitable for the ground.


The second disadvantage is that many glazed bricks have their own defects.

For example, there are pinholes, cracks, some water ripples with glazed surfaces, etc. This is determined by the characteristics of this tile production, so we must choose carefully when we buy.

The third point is that the water absorption rate is relatively high.

Therefore, the pore rate on the back is relatively high, which makes water stains easily penetrate from the back to the surface. Especially when we are tiles, the slurry in the cement mortar of the brick may cause some poor quality glazed bricks.

How to buy glazed tiles?


The first point is actually the technique of many friends.

Because a product does not even do the packaging, the home miscellaneous altar person does not believe its products can be done well. The packaging of a complete glazed tile should contain the name, address, address, model, grade, quantity, trademark, production date, and corresponding execution standards of the product in the packaging of the glazed brick. certificate. If the handwriting on the packaging is blurred or many missing, I personally recommend that you do not choose such glazed tiles.

The second point is to observe the glaze tiles with the naked eye to distinguish its quality.

The surface of a good glazed tile should be flat and delicate, and the size is neat. After we got a glazed brick, we put it on our hands, and then observed with our eyes. At this time, there should be no warranty on the surface, no protruding particles, no cracks, and so on.

The third point is to try to detect whether the size of the glazed tile is ruled.

We picked a few glazed bricks on the ground, and paid the edges together to see if it could be strictly pasted together. If you find that the seams of glazed tiles are not tight, it means that the workmanship of these glazed tiles is poor, and it is not recommended to choose.

The fourth point is that we have to look at the patterns on the glaze tiles and patterns.

The pattern or pattern of the good glazed tiles should be consistent with the color, and the pattern should be clearly visible, and the workmanship should be delicate and exquisite. If you can obviously see the leakage, dislocation, broken lines, or large shades of color, it is a sub -product. The overall pattern of the good glazed tiles should be special.

What are the commonly used in glazed tiles?

Because glazed tiles are common wall tiles commonly used in our kitchen and bathrooms. When they are pasted in these parts, the ruler size of such tiles is not very large. This is why glazed tiles are replaced by many floor tiles, and the size is too single.

The size of common oil noodle tiles is

100mm by 100mm, 152mm by 152mm, 200mm by 200mm, 152mm by 200mm, 200mm by 300mm 250mm, 330mm, 300mm by 450mm, and 300mm by 600mm.

How to paste the glazed tiles?

The paste of the glazed tiles actually requires the lowest. Compared to some other low water -absorbing tiles, this kind of tile is the easiest to paste and solid.

First of all, we need to know that the water absorption rate of glazed tiles is basically above 10%, so the adhesive material it corresponds to choose can be ordinary cement mortar. Of course, you can also choose tile glue or dedicated tile adhesive, tile back glue, etc. Essence

The first step is to pick bricks.

After we open the glazed tile packaging, we can test the shop at home. Choose the tiles to have a large size deviation in size, serious color difference, damaged tiles, and so on. Pick these tiles in advance.

The second step is to soak bricks.

The glazed tiles need to be soaked in bricks. Soak in water before use. Take it out two or three hours before preparing to paste to dry. It should ensure that there is no water on the surface.

The third step is the brick brick. I can tell you that you can use cement mortar, or you can use tile glue or tile back glue to stick to the glaze tiles.

Be sure to pay attention when you are tiles. Sprinkle the wall and keep the wall moist, but it is not allowed to have bright water; then you can use tile materials such as cement mortar for tiles.

The fourth step is to maintain. After the tiles are pasted on the wall, it should be maintained in time to keep the water on the surface of the tiles. Big


Home must note that this step is very critical. Many problems in the later stage of glazed bricks are not done well. The maintenance time is about seven days. It can be appropriately shortened in summer, and it can be extended appropriately in winter.

What are the problems need to pay attention to the glazed tile paste?


The first point is the seam of tiles. The glazed tiles must be left in accordance with the requirements when they are paved.

If the tile is not equipped with a sewing card, we can leave the seams according to the gap of 2mm. This can reduce the expansion of tiles due to heating in the future, resulting in empty drums and shedding of tiles.

The second point is the treatment at the corner of the tiles. Because the glazed tile surface is glazed, it is easy to break the glaze if simple cutting is made.

Generally, when cutting glazed tiles, a glass knife must be used to break the glazed layer and then cut it. This must be paid attention to.

The third point is some requirements for spelling when paving the glazed bricks.


Because many glazed tiles with patterns are paved in the direction, we must combine flowers in the direction of the instructions when we are paving, that is, the paving is paved in the direction of the back of the flower. If there is no prompt order, it means that these can be arbitrarily combined.


The fourth point is the problem of glazed tile paste to make the choice of cement.

Personally, I suggest that the strength of the cement cannot be higher than the number 400, because the excessive cement tensile force will cause the glaze to be damaged by the glazed tiles, and the porcelain phenomenon will eventually appear.

How to maintain glazed tiles?

Daily cleaning and maintenance of glazed tiles,

We can scrub the wet rag directly on the surface of the oil surface tiles. Of course, some Jiebao of tiles can also be used to clean up.

If some oil pollution appears on the oil surface brick, the corresponding method of removing oil should be used at this time.

There are many common methods, such as tea water, beer, etc., the method is to use rags to dip tea water or beer to scrub the surface of the glazed brick.


After the glazed tiles are pasted, if there are sediments or mortar on the glazed surface, etc.

This commonly used method is to use concrete thin layer cleaning agent, also called cement mortar cleaning agent for scrubbing.



Regarding some knowledge about the wall tiles of the home, the knowledge of the glaze tiles, the home mixed altar takes the glazed tile as an example to give you a detailed analysis. This includes the source of glazed tiles, the application of glazed tiles, the advantages and disadvantages of glazed tiles, and the paste of glazed tiles, etc., all introduced some introductions. I hope my article can help everyone! The above are all home -made mixed altars in the coastal on July 30, 2019. Everyone is welcome to pay attention to the forwarding comments, and the shortcomings are also expected to teach. This article is originally created by home furnishings. Welcome to follow and take you to grow knowledge together!

Author: ArticleManager